Outside Calls - Inter-Tel Axxess User Manual

To receive an Off-Hook Voice Announce call (a call through your speaker) while
you are on a call:
When you hear a single tone and see an incoming call display, you can do the follow-
ing:
·
To accept the call on the speakerphone without ending your current call: When
you hear a double tone, you may talk handsfree with the caller through the speak-
erphone. (The caller on the handset will be able to hear both you and the party on
the speakerphone.)
·
To block the call from coming through the speaker: Do the following:
a. Press
and the caller is placed on hold.
b. Press
(See
NOTE:
To use this feature, the installer or System Administrator must program your
phone to receive Off-Hook Voice Announce Calls.

Outside Calls

With outside calls, you can talk to people who aren't members of your phone system.
When you make an outside call, however, you must dial any area codes or long dis-
tance digits that your telephone company requires.
Placing Outside Calls
To place an outside call:
With or without the handset lifted, press
1.
Dial the desired number.
2.
NOTE:
dial an account code before you can place your call (see
Depending on how your system is programmed, you may be able to use one of the
following methods to select an outgoing line, instead of pressing the
·
Dial the Outgoing Call feature code (default is 8).
·
Press an unlit CALL key, if you have one.
·
Press an unlit LINE key, if you have one.
·
Dial a Select Line Group feature code (defaults are 92001-92208 but may differ
depending on the software version).
·
Dial the Automatic Route Selection (ARS) feature code (default is 92000 but
may differ depending on the software version).
Axxess Analog Phone User Guide
to allow the incoming call to camp on. The
SPKR
to place your phone in Do-Not-Disturb (DND) mode, if desired.
DND
page 27 for more information about DND mode.)
If you see a request for an account code and hear a single beep, you must
IC
.
OUTGOING
page 47).
OUTGOING
key flashes,
key:
9