4 - UNPACKING
UNPACKING THE STRUCTURE OF THE BOILER
TOOLS: 10 mm face or box spanner
FRONT VIEW
FIGURE 1 - STRUCTURE OF LOGIKA 25-35 BOILER
REMOVAL SCREWS OF PACKAGE
Open the package and remove the two front and back brackets, removing the two screws between each bracket and the boiler and the
two screws that fasten the bracket to the pallet.
Remove the rear bracket, undoing the screws "j" and taking off panel "k" to access the area more easily.
Put the panel "k" back in place when you have done.
Technical Dept. - All rights reserved - Reproduction is prohibited
k
j
REAR VIEW
19