Configuration Of Programmed Mode - RED LOGIKA 25-35 Installation Manual

2 - MENU OPTIONS
CONFIGURATION OF PROGRAMMED MODE (TIMER) - Main menu
The current time and date must be configured to ensure correct operation of the timer.
There are six configurable TIMERS; for each one, the user can select a start and stop time and the days of the week when it is in use.
When one or more programs are active, the status of the boiler and the TIMER "n" alternate on the display. "n" is the number of timer
programs in use, separated by dashes.
Example:
TIMER 1 Timer 1 program active.
TIMER 1-4 Timer 1 and 4 programs active.
TIMER 1-2-3-4-5-6 All timer programs active.
EXAMPLE OF PROGRAMMING
With the boiler on or off:
• access the MENU,
• use the arrow keys (1 and 2) to scroll through to the TIMER option,
• Press the "Menu" key
• The system proposes "P1" (Press keys 1 and 2 for timers P2, P3, P4, P5 and P6).
• Press the "Menu" key to activate "P1".
• press + - and select "ON"
• press the "Menu" key to confirm
At this point the start time is 00:00. Press the + - key to set the start time and press the "menu" key to confirm.
Next, the proposed stop time is 10 minutes later than the configured start time: press the + key and edit the stop time, and press the
"menu" key to confirm.
Next, you are asked to set the days of the week when the configured timer is to be enabled or disabled. Use the - or + key to select the day
on which to enable the timer and press the "menu" key to confirm. The selected day is highlighted. If no day is selected for enabling the
timer, the timer program is no longer enabled on the status window.
Next, program the other days or press "ESC" to exit. Repeat this procedure to program the other timers.
Example of Timer window (boiler on from 6:00 to 22:00, Monday to Friday:
CURRENT TIME
10
0 1 2 3 4 5 6 7 8 9 1 1 1 1 1 1 1 1 1 1 2 2 2 2
0 1 2 3 4 5 6 7 8 9 0 1 2 3
da 06:00
P1 On
a 22:00
Lu Ma Me Gi Ve Sa Do
6
1
2
THE IGNITION PERIOD IS SHOWN ON THE
DISPLAY DURING ACTIVATION OF THE TIMER
3
4
5