Hydraulic Connection Of The Tank To The Boiler - RED LOGIKA 25-35 Installation Manual

7 - INSTALLATION AND ASSEMBLY OF TANK
d) hydraulic connection of the tank to the boiler
The hydraulic kit is already installed on the tank. Simply remove the two flexible pipes in the pellet tank and connect them to the two
pipes in the boiler.
• Remove the flexible pipes.
• Find the gasket "k" (provided).
• Identify the flexible pipe with red marking "u" and connect it to the relative one of the boiler using gasket "k".
u
u
Technical Dept. - All rights reserved - Reproduction is prohibited
k
51