How To Operate The On-Screen Menu; Operating With Projector Control - Christie L2K1000 Setup Manual

How to Operate the On-Screen Menu

The projector can be adjusted or set via the on-screen
menu. For each adjustment and setting procedure, refer
to respective sections in the user's manual (CD-ROM).
1
Press the MENU button on the side control or the
remote control to display the on-screen menu.
2
Use the Point buttons to highlight or select a main
ed
menu item. Press the Point
to access the submenu items. (The selected item is
highlighted in orange.)
3
Use the Point buttons to select the desired
ed
submenu item and press the SELECT button to set or
access the selected item.
4
Use the Point
ed7 8
switch between each option and press the SELECT
button to activate it and return to the submenu.
On-screen menu

Operating with Projector Control

Zoom Adjustment
Press the ZOOM button and "Zoom" will be displayed on the screen.
ed
And then press the Point
Focus Adjustment
Press the FOCUS button and "Focus" will be displayed on the
screen. And then press the Point
the image.
Lens Shift Adjustment
Press the LENS SHIFT button and "Lens shift" will be displayed
on the screen. Use the Pointed
the projection image to the desired point without having picture
distortion. Press and hold the LENS SHIFT button for more than 5
seconds to return the lens to the central position.
Shutter Function
Shutter function allows you to completely block out light to the
screen. Press the SHUTTER button to close the shutter inside the
projector. To open up the shutter, press the SHUTTER button again.
or the SELECT button
8
buttons to adjust the setting or
Point 8
or
SELECT button
buttons to zoom in and out the image.
ed
buttons to adjust the focus of
ed
7 8 buttons to position
- 18 -
Side Control
Remote Control
SELECT button
The currently set
item is marked.
MENU button
SELECT button
POINT buttons
MENU button
POINT buttons
The selected item is
highlighted in orange.
020-000409-01 Rev.1 (08-2011)