Table of Contents
Advertisement
Alarm Monitor
Send event information to a remote client using the Alarm Monitor software.
1.
Select SEND TO ALARM MONITOR and press ENTER to select ON.
2.
Select the types of events to send to the Emergency Agent
(MOTION, SENSOR, MOTION + SENSOR).
3.
Enter the IP ADDRESS of the remote client.
4.
Enter the PORT number.
Note
29716AB
The port number selected is the port that Alarm Monitor uses on the remote PC.
The port shown in this screen must match the port shown in Emergency Agent or
RADIUS and the port must be open on the remote PC.
49
Advertisement
Table of Contents
