Table of Contents
Advertisement
Schedule
Set the recording schedule for each camera:
1.
Press MENU on the front panel or remote control.
or
Click MENU on the Mouse-over menu and select SETUP.
2.
Select RECORD > SCHEDULE.
3.
Select a camera to create a recording schedule, or select ALL.
4.
Select the check box of the desired RECORD MODE.
5.
Click hour block or the day of the week to set the entire day.
NO RECORDING
No Color
CONTINUOUS
Yellow
MOTION
Green
29716AB
No recording.
Even if you set recording frames and select ON in
RECORD > CAMERA, the DVR will not record anything if
you set OFF in RECORD > SCHEDULE.
CONTINUOUS recording.
MOTION-detection recording.
In this mode, the DVR records only when motion is
detected in the motion area, and stops recording when
motion is not detected. Adjust motion area settings in
RECORD > MOTION/EVENT SETUP > INPUT.
If you set motion to OFF in RECORD > MOTION /EVENT
CONFGURATION and set CONT + MOT in SETUP >
RECORD > SCHEDULE the DVR will NOTrecord when
motion is detected.
41
Advertisement
Table of Contents
