EMERGENCY AGENT
OpenEye Emergency Agent is used to view emergency alarms from the connected DVRs,
including Video Signal Loss and Sensor alarms. Use the Filter Options to filter through the
different types of alarms. After viewing event video, include a memo for future searches.
By double-clicking an alarm entry, the search window will open with the associated DVR,
camera, and time related to the event already selected.
Note
Event
Status
Event
Type
Connecting to a DVR Using Emergency Agent
1.
On the E240 DVR go to SETUP.
2.
Go to RECORD > MOTION/EVENT SETUP > ALARM MONITOR.
3.
Set SEND TO ALARM MONITOR to ON.
4.
Define the types of alarms to send to the Emergency Agent software (MOTION,
SENSOR, MOTION+SENSOR).
5.
Enter the IP Address of the computer running the Emergency Agent software.
6.
Note the Port setting.
Note
7.
Create a schedule for the appropriate sensors and cameras.
88
If all Alarm Event results are not visible, click Off to turn the Filter Options off
DVR List
The Emergency Agent uses one port to transfer the data through. The port can be
adjusted inside the Network settings if necessary. It is recommended that the
default setting should be used unless the port must be changed.
Video Display
Zoom
Thumbnails
Event List
Memo Text Box