Table of Contents
Advertisement
MONITOR SETUP
The NVR may have one or both of the following connections available for monitors which can be used individually or in tandem.
Attach the monitor or monitors to the rear of the NVR using the cable supplied by the monitor manufacturer. Refer to the monitor
manual for detailed information on how to setup and use it.
Note
The monitor must be capable of displaying a screen resolution of 1024 x 768 and at least 32 Bit color.
POWER SETUP
20
DVI Output
SVGA Output
WARNING:
To reduce the risk of electrical shock or damage to the equipment:
Do not disable the power grounding plug.
The grounding plug is an important safety feature.
If the electrical plug you are using does not have a ground plug receptacle contact a licensed
electrician to have it replaced with a grounded electrical outlet.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
Disconnect the power from the computer by unplugging the power cord either from the electrical
outlet or the computer.
To TV / Digital Monitor
To VGA Monitor
Advertisement
Table of Contents
