Table of Contents
Advertisement
PTZ
To enter PTZ mode:
•
Right-click the Live screen and select PTZ on the pop-up menu, or
•
Click the PTZ icon on the Tool menu on the bottom of the main screen.
Drag the mouse up/down or left/right to move pan/tilt position of the camera. As you move the
mouse away from the center of the screen, the camera movement speed increases. You can
also zoom-in/out by using the scroll wheel on the mouse.
Note
PTZ Popup Menu
Right-click the desired camera to open the PTZ Popup menu while in PTZ mode.
M
ZOOM
FOCUS
IRIS
PRESET
PRESET
TOUR
Create PTZ Preset Position
1.
Right-click the desired PTZ camera to open the PTZ Popup menu while in PTZ mode.
2.
Select a PTZ Preset ID number.
3.
Select MOVE under PRESET to move the camera to the desired position.
4.
Select SET to save the preset position.
29716AB
Full PTZ functions are available using the front panel buttons, a mouse, the IR
remote control, or a keyboard controller.
Access the camera OSD menu.
Zoom in/out on PTZ camera.
Enabled by default in PTZ
mode.
Adjust focus on PTZ camera.
Adjust the iris on PTZ camera.
Go to preset position. Select the
preset number. The maximum
preset number is 255.
Start preset tour. PRESET
TOUR will sequence though all
preset positions. Can only be
enabled while in full screen
mode.
61
Advertisement
Table of Contents
