Creating a DVR Connection with Remote Software
1.
Install the Remote Software on a PC using the disc provided with your DVR.
2.
Open the Remote Software. The Local Setup window will open automatically.
3.
Click New.
4.
Select OE3-E240 or OE3-E480 as the Site Type.
5.
Enter a name for the system in the Site Name box.
6.
Enter the IP address of the DVR - found in NETWORK > NETWORK SETUP on the
DVR.
7.
Enter the Port number found in NETWORK > NETWORK SETUP on the DVR (default is
2000).
8.
Click OK.
9.
Enter the user name and password of an authorized user as defined in SYSTEM >
USER SETUP on the DVR.
Note
10. Click Connect.
Default Remote Software Log in Information
The default administrative log in information for the remote software:
User Name: admin
Password: <none>
72
User Name and Password are both case sensitive.