Spitting Pass Count Menu - MUTOH Valuevet VJ-1324 Operation Manual

VJ-1324 OPERATION MANUAL
Setup item
Spitting
5.1.2.1

Spitting Pass count menu

Set the frequency (spitting return count) that the print head returns to the spitting box (located) on the
origin side when setting "On" or "On Media" in the Spitting menu.
NOTE
• If you set the flushing return count to a high number, the nozzle will become easily clogged when
printing for a long time because flushing is not performed over the flushing box.
Setup item
ReturnCount
5.1 Setup menu
Setting
<On>
On Media
Off
—
Setting
<1 time> to 999 times
—
Description
Perform the flushing operation on the spitting box located on
the origin side for every shuttle.
•[Enter] key: saves the setting and shifts to the sub menu.
5.1 Setup menu
Perform the spitting operation on the page margins.
The printing speed will be improved since the number of time
to return to the spitting box is reduced.
•[Enter] key: saves the setting and shifts to the sub menu.
5.1.2.1 Spitting Pass count menu
Spitting operation is not performed.
•[Enter] key: saves the setting and shifts to the previous menu.
5.1 Setup menu
•[Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Description
Set the spitting return count.
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.2 Spitting menu
Panel setup menu
173