MUTOH Valuevet VJ-1324 Operation Manual page 257

VJ-1324 OPERATION MANUAL
No. Display
36 Measurement Error
(White Calibration)
37 Measurement Error
(Iligal Operation)
NOTE
• [****] of the error display indicates the ink color that is subject to warning.
7.2 Error messages
Description
White calibration has failed.
Colorimeter has been
installed forcibly without
following the proper color
measurement procedure.
Remedy
• Open the maintenance
cover on the left side of the
printer and install the white
reference plate correctly.
• When the white reference
plate is contaminated,
apply a damp and tightly
squeezed soft cloth to clean
it.
• Start printing and
measuring the color target
again.
• If you still have trouble,
contact your local MUTOH
dealer.
Remove the colorimeter.
Troubleshooting
Reference
4.5 Using
spectrophotomete
r (SPECTROVUE
VM-10)
4.5 Using
spectrophotomete
r (SPECTROVUE
VM-10)
257