Spitting Pass Count Menu - MUTOH ValueJet VJ-1624 Operation Manual

VJ-1624/1624W OPERATION MANUAL
Setup item
Spitting
5.1.2.1

Spitting Pass Count menu

Set the intervals that Print head returns to Spitting boxes when "On" or "On Media" is set in Spitting
menu. Print head returns to Spitting box every shuttle per the set number.
NOTE
• If the number of spitting returns is set high, the spitting operation is not done on Spitting box.
Therefore there is a higher chance of nozzle clogging when printing for a long time. In such a case,
print quality cannot be guaranteed.
Setup item
ReturnCount
Setting
<On>
On Media
Off
—
Setting
<1 time> to 999 times
—
Description
Perform the spitting operation on Spitting box located on the
origin side for every shuttle.
• [Enter] key: saves the setting and shifts to the sub menu.
5.1.2.1 Spitting Pass Count menu
Perform the spitting operation on the page margins.
The printing speed will be improved since the number of time
to return to Spitting box is reduced.
• [Enter] key: saves the setting and shifts to the sub menu.
5.1.2.1 Spitting Pass Count menu
Spitting operation is not performed.
• [Enter] key: saves the setting and shifts to the previous
menu.
5.1 Setup menu
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Description
Set the spitting return count.
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.2 Spitting menu
5-17
5 Panel setup menu