MUTOH Valuevet VJ-1324 Operation Manual page 112

Before using
4. Check the both ends and the center of the print result that printed with Adjust pattern, and select the
number from 1 to 7 that is not out of alignment.
• "6" is selected in the next printing sample.
NOTE
• "4" is the current setting value.
5. "PatternA: 4" is displayed on the operation panel.
6. Press the [+] key or [–] key to enter the number that you selected in Step 4.
NOTE
• When you press the [Cancel] key, "Adj.4: Fine PatternA" is displayed on the operation panel.
112
VJ-1324 OPERATION MANUAL
3.6 Adjust Print