Setup Menu - MUTOH Valuevet VJ-1324 Operation Manual

Panel setup menu
5.1

Setup menu

Various settings of the printer are configured.
Setup item
User Type
Spitting
Side Margin
Media Initial
Media Width
Output mode
Method of Cut
Origin
Prev. Stick
StandbyHeating
Head Travel
Multi Strike
Strike Wait
158
Sets the user type setting for printing.
• [Enter] key: shifts to the sub menu.
5.1.1 User Type menu
Sets up the spitting operation while printing.
• [Enter] key: shifts to the sub menu.
5.1.2 Spitting menu
Specifies the right and left margins of printed media.
• [Enter] key: shifts to the sub menu.
5.1.3 Side Margin menu
Sets whether to detect the media width and edge while initializing the media.
• [Enter] key: shifts to the sub menu.
5.1.4 Media Initial menu
Specifies the media width between the loading mark and the left end if media detection is not
performed during media initialization.
Displays the detected media width if media detection is performed during media initialization.
• [Enter] key: shifts to the sub menu.
5.1.5 Media Width menu
Sets the media ejection method after printing.
• [Enter] key: shifts to the sub menu.
5.1.6 Output Mode menu
Sets the media cutting method after printing.
• [Enter] key: shifts to the sub menu.
5.1.7 Method of Cut menu
Sets the beginning of printing (origin) of the print data.
• [Enter] key: shifts to the sub menu.
5.1.8 Origin menu
Sets up to prevent media from sticking when printing starts.
• [Enter] key: shifts to the sub menu.
5.1.9 Prev. Stick menu
Sets the time to preheat the heater while the printer is n standby mode.
• [Enter] key: shifts to the sub menu.
5.1.10 StandbyHeating menu
Sets up the range that the print head moves while printing.
• [Enter] key: shifts to the sub menu.
5.1.11 Head Travel menu
Sets up the overwrite count per line.
• [Enter] key: shifts to the sub menu.
5.1.12 Multi Strike menu
Sets up the waiting time while overwrite printing.
• [Enter] key: shifts to the sub menu.
5.1.13 Strike Wait menu
VJ-1324 OPERATION MANUAL
Description
5.1 Setup menu