Nothing Is Printed - MUTOH Valuevet VJ-1324 Operation Manual

VJ-1324 OPERATION MANUAL
No. Possible cause
4 Is the maintenance cover open?
(2) Does not work after loading the media
No. Possible cause
1 Is the front cover open or media loading lever
raised?
2 Is the maintenance cover open?
3 Is the media loaded at an angle?
4 Is the ink cartridge inserted?
5 Are you using the recommended media?
6 Is the printer being used in an environment
other than the one specified, such as in direct
sunlight?
(3) When data is sent from the computer, an error occurs at the printer and

nothing is printed

No. Possible cause
1 Is the type of printer selected correctly at the
computer?
2 Are the interface requirements and command
mode the same on the computer side and
printer side?
(4) Cannot use the computer online using LAN
No. Possible cause
1 Is the network interface cable connected
correctly?
7.1 Malfunctions and failures
Remedy
Close the maintenance cover.
Remedy
Close the front cover.
Lower the media loading lever.
Close the maintenance cover.
Load the media straight.
Insert the ink cartridge.
Use the recommended media.
Only use the printer in an environment that is
specified for use.
Remedy
Check that the printer type settings on the
computer side and printer side are the same.
Remedy
Confirm the types of the cross and straight
cables, and connect the network interface
cable correctly.
Troubleshooting
Reference
6.2.4 Cleaning
the cleaning wiper
6.2.5 Cleaning
around the print
head
Reference
3.4 Loading
media
6.2.4 Cleaning
the cleaning wiper
6.2.5 Cleaning
around the print
head
3.4 Loading
media
3.3 Installing
ink cartridges
4.2.1 Media
type
Installation
manual
Reference
3.7
Connecting the
printer to PC
Reference
3.7.3
Connecting a
network interface
cable
247