Panel setup menu
5.1.17.1 Roll Length menu
Sets up the roll media length.
NOTE
• After replacing the roll media, set the roll media length again.
If the roll media length is not set, the residual quantity of roll media may not be displayed correctly.
Setup item
Length
5.1.18 Longstore menu
Wash the print head with the cleaning fluid.
NOTE
• Make sure to use the dedicated cleaning fluid (Model number: VJ-MSINK3-CL220/VJ-MSINK3-
CL1000).
Setup item
Longstore
188
Setting
1 m to <30 m> to 99 m
—
Setting
Start
Remove Cartridges
—
VJ-1324 OPERATION MANUAL
Description
Sets the roll media length.
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Description
Wash the print head with the cleaning fluid.
• [Enter] key:
Performs the head washing operation.
The following content is displayed on the operation panel.
Remove the ink cartridge, and install the cleaning cartridge.
6.1.1 Replacing ink cartridges
• [Cancel] key: shifts to the previous menu without Head
washing.
5.1 Setup menu
5.1 Setup menu