Media-Related Troubleshooting - MUTOH Valuevet VJ-1324 Operation Manual

Troubleshooting
No. Possible cause
2 Are the network settings configured
correctly?
3 Match the printer's network settings with the
computer side environment.
4 Does the Power lamp on the operation panel
turn on after sending printing data from the
computer?
7.1.3

Media-related troubleshooting

(1) The media slips or is torn during initialization
NOTE
• If the media is jammed or torn, remove it according to "7.3 The media is jammed".
No. Possible cause
1 Are you using the recommended media?
2 Is the loading position of the media correct?
3 Is the scroller set correctly?
4 Are there any foreign materials such as paper
attached to the pressurizing roller?
5 Is the printer being used in an environment
other than the one specified, such as in direct
sunlight?
6 Are you using folded, torn or rolled media?
7 Does the media bend?
248
Remedy
Configure the network settings correctly.
Match this product's network settings with the
computer side environment.
If the Power lamp does not turn on, contact the
computer manufacturer.
Remedy
Use the recommended media.
Set the media correctly.
Set the scroller correctly.
Clean the pressurizing roller.
Only use the printer in an environment that is
specified for use.
Replace the media.
Use the recommended media.
When using media other than the dedicated
one, set the Vacuum Fan menu.
VJ-1324 OPERATION MANUAL
Reference
5.1.22 IP
Address menu
5.1.24 Gateway
menu
3.7.1 System
requirements
—
Reference
4.2.1 Media
type
3.4 Loading
media
3.4.1 Loading
roll media
6.2.2 Cleaning
the inside of the
printer
Installation
manual
4.2.2 Cautions
on handling media
4.2.1 Media
type
5.1.1.1.8
Vacuum Fan menu
7.1 Malfunctions and failures
to