Prev. Stick Menu; Standbyheating Menu - MUTOH Valuevet VJ-1324 Operation Manual

Panel setup menu
5.1.9

Prev. Stick menu

Sets up to prevent media from sticking when printing starts.
NOTE
• When the Output Mode menu is set to "Take-up", the setting for the Prev. Stick menu is disabled.
5.1.6 Output Mode menu
Setup item
Prev. Stick

5.1.10 StandbyHeating menu

Sets the time to preheat the heater while the printer is n standby mode.
Setup item
Standby Heating
182
Setting
<Off>
On
—
Setting
10 minutes - <60 minutes>
—
VJ-1324 OPERATION MANUAL
Description
The stick-prevent operation is not performed.
The stick-prevent operation is performed.
Feed the media back and forth to prevent from sticking.
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Description
Sets the time to pre-heat the heater.
When the preset time has passed, each heater turns Off.
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1 User Type menu
5.1 Setup menu