Olivetti d-copia 1800 Service Manual page 82

2KL/2KK
Maintenance
item No.
Checking messages
U245
Description
Displays a list of messages on the operation panel.
Purpose
To check the messages to be displayed.
Method
1. Press the start key.
2. Select the item to be displayed.
3. Displays the message one by one using zoom +/- keys.
When a message number is entered with the numeric keys and then the start key is pressed, the mes-
sage corresponding the specified number is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Setting the maintenance cycle
U250
Description
Displays and changes the maintenance cycle.
Purpose
To check and change the maintenance cycle.
Method
1. Press the start key.
2. Select the item using the exposure adjustment keys.
Exposure indicator
Exp. 1
Exp. 2
3. Change the setting using the numeric or zoom +/- keys.
4. Press the start key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Checking/clearing the maintenance count
U251
Description
Displays, clears and changes the maintenance count.
Purpose
To check the maintenance count. Also to clear the count during maintenance service.
Method
1. Press the start key.
2. Select the item using the exposure adjustment keys.
Exposure indicator
Exp. 1
Exp. 2
Exp. 3
Clearing
1. Light exp. 3.
2. Press the start key. The count is cleared.
Setting
1. Change the count using the numeric or zoom +/- keys.
2. Press the start key. The count is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
1-3-44
Y110980-1
Description
Description
First 3 digits
Last 3 digits
Description
First 3 digits
Last 3 digits
Clearing the count
Service Manual
Service Manual
Setting range Initial setting
000 to 999 150
000 to 999 000
Setting range Initial setting
000 to 999 000
000 to 999 000
- -
Y110980-1