Table of Contents
Advertisement
2KL/2KK
Maintenance
item No.
Adjusting the scanning position for originals from the DP
U068
Description
Adjusts the position for scanning originals from the DP.
Purpose
Used when the image fogging occurs because the scanning position is not proper when the DP is used. Run
U071 to adjust the timing of DP leading edge when the scanning position is changed.
Setting
1. Press the start key.
2. Change the setting using the zoom +/- keys.
Description
Scanning position
Increasing the value moves the image backward, and decreasing it moves the image forward.
Supplement
While this maintenance item is being executed, copying from an original is available in interrupt copying mode
(which is activated by pressing the interrupt key).
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
1-3-22
Description
Setting range
Initial setting
-17 to 17
0
Service Manual
Change in value per step
0.17 mm
Y110980-1
Advertisement
Table of Contents
