Table of Contents
Advertisement
Maintenance
item No.
Setting toner loading operation
U144
Description
Sets toner loading operation after completion of copying.
Purpose
To set whether or not toner is loaded on the drum after low density copying. Normally no change is necessary
from the initial setting.
Setting
1. Press the start key.
2. Select the item.
3. Change the setting using the zoom +/- keys.
Exposure indicator
Exp. 1
Exp. 2
Exp. 3
4. Press the start key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Checking sensors for toner
U150
Description
Displays the on-off status of sensor related to toner.
Purpose
To check if the sensor operate correctly.
Method
1. Press the start key.
2. Turn sensor on and off manually to check the status.
When the on-status of a sensor is detected, that sensor is displayed in reverse.
Original size indicator
A4/Letter-R
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Y110980-1
Description
Description
Toner loading operation
Number of pages set
Printing ratio
Sensor
Toner container sensor (TCS)
Service Manual
Setting range
Initial setting
1 (ON) / 0(OFF)
0
1 to 50
5
10 to 40
30
2KL/2KK
1-3-37
Advertisement
Table of Contents
