Olivetti d-copia 1800 Service Manual page 37

4. Pass the cassette heater cable through the
edging and fit the cassette heater to the
machine.
5. Attach the cassette heater using the M3 x 8
S tight screw.
6. Pass the cassette heater cable through the
clamp. Connect the connector of the cas-
sette heater cable to the connector of the
machine.
7. Refit all the removed parts.
Y110980-1
M3 x 8
S tight screw
Service Manual
Edging
Cassette heater cable
Cassette heater
Figure 1-2-23
Clamp
Cassette heater cable
Figure 1-2-24
2KL/2KK
Connector
1-2-17