Changing Camera Settings - FLIR InfraCAM User Manual

8.19

Changing camera settings

General
Camera settings have an effect on images and how the camera operates.
Applicability The procedure below is applicable to these settings:
Auto off (to set time period after which the camera power goes off)
■
Display intensity (to set intensity of the display)
■
Language (to change language)
■
Unit (to change units)
■
Time format (to change time format)
■
Set time (to set time)
■
Time stamp (to set time-stamping of images)
■
Restore default (to restore factory default values)
■
USB cable (to set USB mode)
■
Procedure
Follow this procedure to change the camera settings above:
1
2
3
4
5
Publ. No. 1558299 Rev. a200 – ENGLISH (EN) – February 12, 2007
To display the main menu, push Menu.
To select , push the navigation pad up/down.
To enable the Settings menu, push Select.
To select the setting you want to change, push the navigation pad up/down.
Use the navigation pad and the following buttons to change the setting:
Select
■
Close
■
OK
■
Cancel
■
8 – Operating the camera
51
8