Changing Both The Maximum And Minimum Temperature Level At The Same Time - FLIR InfraCAM User Manual

8 – Operating the camera
8.10.3
Procedure
8
40
Changing both the maximum and minimum temperature level at
the same time
Follow this procedure to change both the maximum and minimum temperature at
the same time:
1 Do one of the following:
If the letter A is displayed in the bottom right corner of the screen, push
■
Man/Auto one time.
If the letter M is displayed in the bottom right corner of the screen, go
■
to the next step below.
2
To select , push the navigation pad left/right.
3 To change the value, push the navigation pad up/down.
Publ. No. 1558299 Rev. a200 – ENGLISH (EN) – February 12, 2007