FLIR InfraCAM User Manual page 67

Method 2 Follow this procedure to move images to a PC with ThermaCAM™ QuickReport:
1
2
3
4
5
6
7
8
NOTE
When you select Network disk a help text is displayed in the camera. Read the help
text carefully.
SEE ALSO
For information about how to install and use ThermaCAM™ QuickReport, see Ther-
maCAM™ QuickReport User's manual, Publ. No. –. FLIR Systems ships this manual
with your camera.
Publ. No. 1558299 Rev. a200 – ENGLISH (EN) – February 12, 2007
To display the main menu, push Menu.
To select , push the navigation pad up/down.
To enable the Settings menu, push Select.
To select USB cable, push the navigation pad up/down.
To select Network disk. push the navigation pad up/down.
Click OK.
Connect the camera to the computer according to ThermaCAM™ QuickRe-
port User's manual, Publ. No. –.
See ThermaCAM™ QuickReport User's manual, Publ. No. – for more instruc-
tions.
8 – Operating the camera
53
8