Increasing Or Decreasing The Maximum Temperature Level - FLIR InfraCAM User Manual

8 – Operating the camera
8.10.1
Procedure
8
38

Increasing or decreasing the maximum temperature level

Follow this procedure to increase or decrease the maximum temperature level:
1 Do one of the following:
If the letter A is displayed in the bottom right corner of the screen, push
■
Man/Auto one time.
If the letter M is displayed in the bottom right corner of the screen, go
■
to the next step below.
2
To select , push the navigation pad left/right.
3 To change the value, push the navigation pad up/down.
Publ. No. 1558299 Rev. a200 – ENGLISH (EN) – February 12, 2007