Starting The Camera; Stopping The Camera - FLIR InfraCAM User Manual

8.4

Starting the camera

Procedure
Push the power button to start the camera.
8.5

Stopping the camera

Procedure
Push and hold the power button for more than 0.5 seconds to stop the camera.
NOTE
If you do not use the camera, the power goes off after a time period that you can set
in the menu system (See section 8.19 – Changing camera settings on page 51.).
Publ. No. 1558299 Rev. a200 – ENGLISH (EN) – February 12, 2007
8 – Operating the camera
31
8