Power Indicator - FLIR InfraCAM User Manual

5 – Camera parts
5.5
General
Figure
5
Explanation
NOTE
16

Power indicator

The camera has two power modes. An indicator shows these modes.
10715803;a3
This table gives an explanation about the indicator:
Signal type
The green light is continuous.
The green light is off.
If the green light flashes 10 times per second the camera has a hardware problem.
Contact your local sales office for instructions where to send the camera for service.
Explanation
The camera is on.
The camera is off.
Publ. No. 1558299 Rev. a200 – ENGLISH (EN) – February 12, 2007