Camera Settings; Measurement Parameters; Connections; Camera Temperature Range - FLIR C Series User Manual

13

Camera settings

The Settings menu includes the following:

• Measurement parameters.

• Connections.

• Camera temperature range.

• Save options & storage.

• Accounts.

• Device settings.
To display the Settings menu, tap the Settings button
13.1 Measurement parameters
For accurate temperature measurements, it is important to use appropriate measure-
ment parameters. The Measurement parameters submenu is used to set these parame-
ters. For more information, see section 8.4 Changing the measurement parameters,
page 16.
13.2 Connections
• Wi-Fi: This setting defines Wi-Fi networks. For more information, see section 10.1
Connecting to Wi-Fi, page 19.
• Bluetooth: This setting defines Bluetooth connectivity. For more information, see sec-
tion 12.5 Bluetooth connection, page 24.
13.3 Camera temperature range
For accurate temperature measurements, you must change the Camera temperature
range setting to suit the expected temperature of the object you are inspecting.
The unit (℃ or ℉) depends on the temperature unit setting, see section 13.6 Device set-
tings, page 28.
13.4 Save options & storage
• Auto upload: When this setting is on, new images will automatically be uploaded to
your FLIR Ignite account when the camera is connected to the internet.
• Photo as separate JPEG: For the Thermal MSX, Thermal, and Picture in picture im-
age modes, a visual image is always saved in the same JPEG file as the thermal im-
age. Enabling this setting saves an extra low-resolution visual image as a separate
JPEG file.
• Add note after saving: When this setting is on, the note tool will be displayed when an
image has been saved.
• Digital camera: This setting is used to turn on/off the digital camera. Turning off the
digital camera can for example be required in restricted areas and in confidential (e.g.
doctor/patient) situations. When the digital camera is off, the images modes Thermal
MSX and Picture in picture are disabled.
• Delete all saved files...: This displays a dialog box where you can choose to perma-
nently delete all the saved files from the camera memory or to cancel the delete
action.
13.5 Accounts
The Accounts dialog box is used to pair the camera with your FLIR Ignite account. For
more information, see section 10 Uploading images, page 19.
#T810539; r. AD/68933/69002; en-US
.
Easier to use USB C lead
27