Charging The Battery - FLIR InfraCAM User Manual

8.3

Charging the battery

NOTE
You must charge the battery for four hours before you start the camera the first time.
General You must charge the battery when the message Battery voltage is low! is displayed
on the screen.
Do one of these procedures to charge the battery:
Use the combined power supply & battery charger to charge the battery when it
■
is inside the camera.
Use the combined power supply & battery charger to charge the battery when it
■
is outside the camera.
Use the stand-alone battery charger to charge the battery (The stand-alone battery
■
charger is an item that is not included in the standard package.).
SEE ALSO
For information how to charge the battery, see the following sections:
Section 8.3.1 – Using the combined power supply & battery charger to charge
■
the battery when it is inside the camera on page 28
Section 8.3.2 – Using the combined power supply & battery charger to charge
■
the battery when it is outside the camera on page 29
Section 8.3.3 – Using the stand-alone battery charger to charge the battery on
■
page 30
Publ. No. 1558299 Rev. a200 – ENGLISH (EN) – February 12, 2007
8 – Operating the camera
27
8