Notice To User - FLIR InfraCAM User Manual

2
2
Typographical
conventions
Comments &
questions
Technical support
Software updates
Calibration
Accuracy
4

Notice to user

This manual uses the following typographical conventions:
Semibold is used for menu names, menu commands and labels and buttons in
■
dialog boxes.
Italic is used for important information.
■
Monospace is used for code samples.
■
UPPERCASE is used for names on keys and buttons.
■
Make a report of errors you find, as well as your suggestions for new revisions. Send
an e-mail to:
documentation@flir.se
To get technical support, visit this site:
http://flir.custhelp.com
To submit a question to the technical support team you must be a registered user.
It only takes a few minutes to register online. If you only want to search the knowl-
edgebase for existing questions and answers, you do not need to be a registered
user.
When you want to submit a question, make sure that you have the following informa-
tion on hand:
The camera model name
■
The camera serial number
■
The communication protocol, or method, between the camera and your PC (for
■
example, Ethernet, USB, or FireWire)
Operating system on your PC
■
Microsoft® Office version
■
Full name, publication number and revision number of the manual
■
FLIR Systems regularly issues software upgrades and service releases on the support
pages of the company website:
http://www.flirthermography.com
To find the latest upgrades and service releases, make sure you select USA in the
Select country box in the top right corner of the page.
(This notice only applies to cameras with measurement capabilities:)
We recommend that you send in the camera for calibration one time per year. Contact
your local sales office for instructions where to send the camera.
(This notice only applies to cameras with measurement capabilities:)
For very accurate results, we recommend that you wait 5 minutes after you have
started the camera before you measure a temperature.
Publ. No. 1558299 Rev. a200 – ENGLISH (EN) – February 12, 2007