FLIR InfraCAM User Manual page 35

4
5
6
7
8
9
10
11
12
13
14
15
16
17
Publ. No. 1558299 Rev. a200 – ENGLISH (EN) – February 12, 2007
Measured temperature
If the symbol > or < precedes the temperature value, the value is above
or below the camera's temperature range.
The remaining number of images that you can save in the camera
■
memory (applies only to models without SD Memory Card)
Free memory on the SD Memory Card in per cent (applies only to
■
models with SD Memory Card)
Indicator that shows battery status and that the camera uses the battery. If
the camera uses the power supply, a different indicator is displayed.
Indicator that shows that a USB cable is connected between the camera
and a PC
Date and time
Submenu
Maximum temperature in the temperature range. In this figure, the minimum
temperature is hidden under the main menu.
Indicator that shows if the camera is in auto-adjust mode (A) or manual
adjust mode (M)
Current function of the right selection button of the keypad
Temperature scale
Tool to change the maximum temperature
Tool to change the maximum and minimum temperature at the same time
Tool to change the minimum temperature
Indicator that shows the relative width of the measured temperature span
compared to the temperature scale values
6 – Screen elements
6
21