Auto-Adjusting An Image - FLIR InfraCAM User Manual

8 – Operating the camera
8.9
General
Procedure
NOTE
8
36

Auto-adjusting an image

For best image brightness and contrast, auto-adjust the camera before you measure
a temperature and save an image.
If the letter M is displayed in the bottom right corner of the screen, push Man/Auto
one time to auto-adjust the image.
If the letter A is displayed in the bottom right corner of the screen, the camera is al-
ready auto-adjusted for best image brightness and contrast.
Publ. No. 1558299 Rev. a200 – ENGLISH (EN) – February 12, 2007