Escene ES320 User Manual page 71

Requires "vorName" and "nachName" fields for each LDAP record.
3.2.10 LDAP Number Attributes
Description: This setting can be used to specify the "number" attributes of each
record which are to be returned in the LDAP search results by the LDAP
server. This setting compresses the search results, as the server only returns
the attributes which are requested. The user can configure multiple space
separated number attributes by using this setting. Please consult you system
administrator regarding which number attributes are to be configured.
Valid Values: space separated number attributes e.g. telephoneNumber Mobile
ipPhone Home
Default Value: <blank>
Examples:
￠ Mobile telephoneNumber ipPhone
Requires "Mobile", "telephoneNumber" and "ipPhone" fields for each LDAP
record.
￠ Home Private Office
Requires "Home", "Private" and "Office" fields for each LDAP record.
3.2.11 Protocol
Description: Protocol is the protocol version for the phone when send the bind
request to the server. Please make sure your LDAP server support version 3/2 bind
request.
Valid Values: version 3/version 2
Default Value: version 3
3.2.12 Search Delay(ms)(0~2000)
Description: This setting is for configuring the delay display time after search.
Valid Values: 0~2000
Default Value: 0
3.2.13 LDAP Lookup for Incoming Call
Description: This setting can be used to enable calling line
identification using LDAP. When the setting is turned
"Enable", the phone performs an LDAP number search for the incoming number
and displays the name of the calling party accordingly.
Valid Values: <Enabled>, <Disabled>
Default Value: Disabled
Escene Communication
71
ES320 IP-Phone
71
www.escene.ru