Escene ES320 User Manual page 72

3.2.14 LDAP Sorting Results
Description: This setting is for sorting the search results, if make this option
"Enabled", it will arrange in the first alphabetical of the name order if return the
name display; if only has the number return, it will list in numerical order. Valid
Values: <Enabled>, <Disabled>
Default Value: Disabled
3.2.15 LDAP Lookup for PreDial/Dial
Description: This setting can be used to enable call out line identification using
LDAP. When the setting is turned
"Enabled", the phone performs an LDAP number search for PreDial or Dial status.
Valid Values: <Enabled>, <Disabled>
Default Value: Disabled
3.3 Example for Configuration
You can use the below settings as a starting point and adjust the filter and display
attributes according to your needs.
LDAP Name Filter: (&(telephoneNumber=%s)(sn=%))
LDAP Number Filter: (&(telephoneNumber=%s)(sn=*))
Server Address: 192.168.200.254
configuration.
Port: 389
configuration. Base: dc=Escene,dc=cn
the server configuration. User Name: cn=manager,dc=escene,dc=cn
setting is relate with the server
Password: *****
configuration. Max.Hits: 50
LDAP Name Attributes: cn sn displayName
LDAP Number Attributes: Mobile telephoneNumber ipPhone
Protocol: Version 3
configuration.
Search Delay(ms)(0~2000): 0
LDAP Lookup for Incoming Call: Enabled
LDAP Sorting Results: Enabled
Escene Communication
#####this setting is relate with the server
#####this setting is relate with the server
#####this setting is relate with
configuration.
#####this setting is relate with the server
#####this setting is relate with the server
72
ES320 IP-Phone
#####this
72
www.escene.ru