Escene ES320 User Manual page 70

to query the LDAP server.
Default Value: <blank>
3.2.7 Password
Description: This setting specifies the bind "Password" for LDAP servers. Escene
phones use "simple" authentication scheme for bind requests. This setting can
be left blank in case the server allows anonymous binds. Otherwise you will
need to provide the Password along with the Username in order to access the
LDAP server.
Default Value: <blank>
3.2.8 Max.Hits(1~32000)
Description: This setting specifies the maximum number of search
results to be returned by the LDAP server. If Max.hits is 0 or blank the
LDAP server will return all search results. Please note that a very large value of
the "Max. Hits"
setting should
The default value for this setting is blank.
Default Value: 50
3.2.9 LDAP Name Attributes
Description: This setting can be used to specify the "name" attributes of each
record which are to be returned in the LDAP search results. This setting
compresses
attributes which are requested by the Escene phone. The setting allows
the user to configure multiple space separated name attributes. Please
consult your system administrator regarding which name attributes are to be
configured.
Valid Values: Space separated name attributes, see examples below.
Default Value: <blank>
Examples:
￠ cn sn displayName
Requires "cn", "sn" and "displayName" fields for each LDAP record.
￠ givenName
Requires "givenName" field for each LDAP record.
￠ vorName nachName
Escene Communication
will slow down
be configured
the search results,
the LDAP lookup,
according to the
as the server
ES320 IP-Phone
therefore the
available bandwidth.
only returns the
70
www.escene.ru
70