Peripheral Devices - Supermicro X10DRT-L User Manual

X10DRT-L/LIBQ/LIBF Motherboard User's Manual
Peripheral
Devices
BIOS
Power
Management
System
Health
Monitoring
•
S-SATA 3.0
•
RAID
IPMI 2.0
•
IPMI 2.0 supported by ASpeed AST 2400
Serial (COM) Port
•
One (1) Fast UART 16550 port on the I/O back panel
InfiniBand Connector (Optional for X10DRT-
LIBQ/LIBF)
•
One (1) InfiniBand connector with FDR/QDR support
on the IO back panel
USB Devices
•
Two (2) USB 2.0 ports on the rear I/O panel (USB 0/1)
•
One (1) Type-A USB 3.0 connector (USB2)
•
16 MB SPI AMI BIOS
•
ACPI 2.0/3.0/4.0, USB keyboard, Plug-and-Play
(PnP), SPI dual/quad speed support, RTC (Real-
Time Clock) Wake-Up, and SMBIOS 2.3
•
ACPI Power Management
•
Main switch override mechanism
•
Power-on mode for AC power recovery
•
Intel Intelligent Power Node Manager 3.0 (available
®
when the Supermicro Power Manager [SPM] is in-
stalled and a special power supply is used. See the
note on Page 1-14.)
•
Management Engine (ME)
System Health/CPU Monitoring
•
Onboard voltage monitoring for 1.2V +3.3V, 3.3V
standby, +5V, +5V standby, +12V, CPU core, mem-
ory, chipset, BMC, PCH, and battery voltages
•
CPU/system overheat LED and control
•
CPU Thermal Trip support
•
Status monitor for speed control
1-8
Four (4) S-SATA 3.0 ports sup-
ported by Intel SCU (S-SATA
0-3) (Note: S-SATA2/S-SATA3:
can be used as Supermicro Su-
perDOM (-Disk-on-Module) with
built-in power connectors)
RAID 0, 1, 10, 5
SM Flash UEFI BIOS
®