Peripheral Devices - Supermicro X9DRW-CF31 User Manual

X9DRW-CF31/X9DRW-CTF31 Motherboard User's Manual
Peripheral
Devices
BIOS
Power
Management
PC Health
Monitoring
•
SAS 3.0 Mezzanine Card w/LSI3108 Con-
troller,
Supercap (Optional; See Note 5 on
Page 1-9.)
•
SAS RAID RAID 0, 1, 5, 6, 10, 50, 60
IPMI 2.0
•
IPMI 2.0 supported by the Nuvoton WPCM450 BMC
Serial (COM) Port
•
One (1) Fast UART 16550 connection on the
backpanel (header only)
VGA
•
Backplane VGA Port
USB Devices
•
Four (4) USB ports on the rear I/O panel (USB 0/1,
USB 2/3),
•
Two (2) Front Panel USB headers (USB 4/5)
•
16 MB AMI BIOS
•
APM 1.2, PCI 2.3, ACPI 1.0/2.0/3.0/4.0, USB Key-
board, Plug & Play (PnP) and SMBIOS 2.7 or later
•
ACPI/ACPM Power Management
•
Main switch override mechanism
•
Power-on mode for AC power recovery
•
Keyboard Wake-up from Soft-off
•
Intel Intelligent Power Node Manager (Available
®
when the Supermicro Power Manager "SPM" is
installed in the system)
•
Management Engine
CPU Monitoring
•
Onboard voltage monitors for onboard chipset,
memory, processors, standby power, and other criti-
cal components.
•
CPU 5+1-Phase switching voltage regulator
•
CPU/System overheat LED and control
•
CPU Thermal Trip support
•
Thermal Monitor 2 (TM2) support
1-8
Flash EEPROM
®