Traffic Meter Logs; Routing Logs; Lan To Wan Logs - NETGEAR SRX5308 Reference Manual

Table 106. System logs: VPN log messages, port forwarding, LAN host and interface
Message
Explanation
Recommended action

Traffic Meter Logs

Table 107. System logs: traffic meter
Message
Explanation
Recommended action

Routing Logs

This section explains the logging messages for the various network segments (such as LAN
to WAN) for debugging purposes. These logs might generate a significant volume of
messages.

LAN to WAN Logs

Table 108. Routing logs: LAN to WAN
Message
Explanation
Recommended action
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
2000 Jan 1 01:35:41 [SRX5308] [portforwarding]
id=SRX5308 time="2000-1-1 1:35:41" fw=192.168.11.1 pri=6 rule=access-policy
proto="Virtual Transport (Java)" src=192.168.11.2 user=sai dst=192.168.11.1 arg=
"" op="" result="" rcvd="" msg="Virtual Transport (Java)"
A SSL VPN tunnel through port forwarding is established for ID SRX5308 from the
LAN host 192.168.11.2 with interface 192.168.11.1 and logged in with the user
name "sai."
None
Jan 23 19:03:44 [TRAFFIC_METER] TRAFFIC_METER: Monthly Limit of 10 MB
has reached for WAN1._
Traffic limit to WAN1 that was set as 10 Mb has been reached.
This stops all the incoming and outgoing traffic, that is, if you selected the Block All
Traffic radio button in the When Limit is Reached section on the WAN TrafficMeter
screen.
To start the traffic, restart the traffic limit counter.
Nov 29 09:19:43 [SRX5308] [kernel] LAN2WAN[ACCEPT] IN=LAN OUT=WAN
SRC=192.168.10.10 DST=72.14.207.99 PROTO=ICMP TYPE=8 CODE=0
• This packet from LAN to WAN has been allowed by the firewall.
• For other settings, see
None
System Logs and Error Messages
Table 81 on page 324.
338