Create Bandwidth Profiles - NETGEAR SRX5308 Reference Manual

Table 23. Add QoS Profile screen settings (continued)
Setting
Re-Mark
(continued)
QoS Priority
4. Click Apply to save your settings. The new QoS profile is added to the List of QoS Profiles
table.

To edit a QoS profile:
1. In the List of QoS Profiles table, click the Edit table button to the right of the QoS profile
that you want to edit. The Edit QoS Profile screen displays.
2. Modify the settings that you wish to change (see the previous table).
3. Click Apply to save your changes. The modified QoS profile is displayed in the List of QoS
Profiles table.

To delete a QoS profile:
1. In the List of QoS Profiles table, select the check box to the left of the QoS profile that
you want to delete, or click the Select All table button to select all profiles.
2. Click the Delete table button.

Create Bandwidth Profiles

Bandwidth profiles determine the way in which data is communicated with the hosts. The
purpose of bandwidth profiles is to provide a method for allocating and limiting traffic, thus
allocating LAN users sufficient bandwidth while preventing them from consuming all the
bandwidth on your WAN link.
For outbound traffic, you can apply bandwidth profiles on the available WAN interfaces in
both the single WAN port mode and auto-rollover mode, and in load balancing mode on the
interface that you specify. For inbound traffic, you can apply bandwidth profiles to a LAN
interface for all WAN modes. Bandwidth profiles do not apply to the DMZ interface.
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Description
QoS Value The QoS value in the ToS or DiffServ byte of an IP header. The QoS
value that you enter depends on your selection from the QoS
drop-down list:
• For IP Precedence, select a value from 0 to 7.
• For DSCP, select a value from 0 to 63.
The QoS priority represents the classification level of the packet among the priority
queues within the VPN firewall. If you select Default, packets are mapped based on
the ToS bits in their IP headers.
From the QoS Priority drop-down list, select one of the following priority queues:
• Default
• High
• Medium High
• Medium
• Low
Firewall Protection
119