Create Ip Groups - NETGEAR SRX5308 Reference Manual


To delete one or more services:
1. In the Custom Services Table, select the check box to the left of the service that you
want to disable, or click the Select All table button to select all services.
2. Click the Delete table button.

Create IP Groups

An IP group contains a collection of individual IP addresses that do not need to be within the
same IP address range. You specify an IP group as either a LAN group or WAN group and
use the group as a firewall object to which you apply a firewall rule.

To create an IP group:
1. Select Security > Services > IP Groups. The IP Groups screen displays. (The
following figure shows three groups in the Custom IP Groups Table as an example.)
Figure 61.
2. In the Add New Custom IP Group section of the screen, do the following:
• In the IP Group Name field, enter a name for the group.
• From the IP Group Type drop-down list, select LAN Group or WAN Group.
3. Click Apply to save your changes. The new IP group is displayed in the Custom IP Groups
Table.
4. In the Custom IP Groups Table, click the Edit table button to the right of the IP group that
you just created. The Edit IP Group screen displays. (The following figure shows three IP
addresses in the IP Addresses Grouped table as an example.)
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Firewall Protection
115