System Log Messages; Ntp - NETGEAR SRX5308 Reference Manual

System Log Messages

This section describes log messages that belong to one of the following categories:
• Logs generated by traffic that is meant for the VPN firewall.
• Logs generated by traffic that is routed or forwarded through the VPN firewall.
• Logs generated by system daemons, the NTP daemon, the WAN daemon, and other
daemons.
For information about how to select many of these logs, see
Alerts, and Syslogs

NTP

This section describes log messages generated by the NTP daemon during synchronization
with the NTP server.
Table 82. System logs: NTP
Message
Explanation
Recommended action
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
on page 271.
Nov 28 12:31:13 [SRX5308] [ntpdate] Looking Up time-f.netgear.com
Nov 28 12:31:13 [SRX5308] [ntpdate] Requesting time from time-f.netgear.com
Nov 28 12:31:14 [SRX5308] [ntpdate] adjust time server 69.25.106.19 offset
0.140254 sec
Nov 28 12:31:14 [SRX5308] [ntpdate] Synchronized time with time-f.netgear.com
Nov 28 12:31:16 [SRX5308] [ntpdate] Date and Time Before Synchronization: Tue
Nov 28 12:31:13 GMT+0530 2006
Nov 28 12:31:16 [SRX5308] [ntpdate] Date and Time After Synchronization: Tue
Nov 28 12:31:16 GMT+0530 2006
Nov 28 12:31:16 [SRX5308] [ntpdate] Next Synchronization after 2 Hours
Message 1: DNS resolution for the NTP server (time-f.netgear.com).
Message 2: Request for NTP update from the time server.
Message 3: Adjust time by re-setting system time.
Message 4: Display date and time before synchronization, that is, when
resynchronization started.
Message 5: Display the new updated date and time.
Message 6: Next synchronization will be after the specified time.
Example: In these logs the next synchronization will be after 2 hours. The
synchronization time interval is configurable through the CLI.
None
System Logs and Error Messages
Activate Notification of Events,
325