NETGEAR SRX5308 Reference Manual page 217

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Table 54. Add SSL VPN Policy screen settings (continued)
Setting Description
Apply IP Network
Policy For
(continued)
All
Addresses
4. Click Apply to save your settings. The policy is added to the List of SSL VPN Policies table
on the Policies screen. The new policy goes into effect immediately.
Virtual Private Networking Using SSL Connections
Policy Name A descriptive name of the SSL VPN policy for identification and
management purposes.
IP Address The network IP address to which the SSL VPN policy is
applied.
Subnet Mask The network subnet mask to which the SSL VPN policy is
applied.
Port Range / A port (fill in the Begin field) or a range of ports (fill in the Begin
Port Number and End fields) to which the SSL VPN policy is applied. Ports
can be 0 through 65535. The policy is applied to all TCP and
UDP traffic that passes on those ports. Leave the fields blank
to apply the policy to all traffic.
Service From the drop-down list, select the service to which the SSL
VPN policy is applied:
• VPN Tunnel. The policy is applied only to a VPN tunnel.
• Port Forwarding. The policy is applied only to port
forwarding.
• All. The policy is applied both to a VPN tunnel and to port
forwarding.
Permission From the drop-down list, select whether the policy permits
(PERMIT) or denies (DENY) access.
Policy Name A descriptive name of the SSL VPN policy for identification and
management purposes.
Port Range / A port (fill in the Begin field) or a range of ports (fill in the Begin
Port Number and End fields) to which the SSL VPN policy is applied. Ports
can be 0 through 65535. The policy is applied to all TCP and
UDP traffic that passes on those ports. Leave the fields blank
to apply the policy to all traffic.
Service From the drop-down list, select the service to which the SSL
VPN policy is applied:
• VPN Tunnel. The policy is applied only to a VPN tunnel.
• Port Forwarding. The policy is applied only to port
forwarding.
• All. The policy is applied both to a VPN tunnel and to port
forwarding.
Permission From the drop-down list, select whether the policy permits
(PERMIT) or denies (DENY) access.
217