Set User Login Policies - NETGEAR SRX5308 Reference Manual


To delete one or more user accounts:
1. In the List of Users table, select the check box to the left of the user account that you
want to delete, or click the Select All table button to select all accounts. You cannot
delete a default user account.
2. Click the Delete table button.
Note: You cannot delete the default admin or guest user.

Set User Login Policies

You can restrict the ability of defined users to log in to the VPN firewall's web management
interface. You can also require or prohibit logging in from certain IP addresses or from
particular browsers.
Configure Login Policies

To configure user login policies:
1. Select Users > Users. The Users screen displays (see
2. In the Action column of the List of Users table, click the Policies table button for the user for
which you want to set login policies. The Policies submenu tabs display, with the Login
Policies screen in view:
Figure 142.
3. In the User Login Policies section of the screen, make the following selections:
• To prohibit this user from logging in to the VPN firewall, select the Disable Login
check box.
• To prohibit this user from logging in from the WAN interface, select the Deny Login
from WAN Interface check box. In this case, the user can log in only from the LAN
interface.
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Managing Users, Authentication, and Certificates
Figure 140
231
on page 229).