NETGEAR SRX5308 Reference Manual page 254

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
2. Enter the settings as explained in the following table:
Table 62. Remote Management screen settings
Setting
Secure HTTP Management
Allow Secure HTTP Management?
Note: The IP address and port
number to connect to the VPN
firewall are shown in this section of
the screen.
Telnet Management
3. Click Apply to save your changes.
WARNING!
If you are remotely connected to the VPN firewall and you select
the No radio button to disable HTTP remote management, you and
all other SSL VPN users are disconnected when you click Apply.
When remote management is enabled, you need to use an SSL connection to access the
VPN firewall from the Internet. You need to enter https:// (not http://) and type the VPN
firewall's WAN IP address in your browser. For example, if the VPN firewall's WAN IP
address is 172.16.0.123, type the following in your browser: https://172.16.0.123.
The VPN firewall's remote login URL is:
https://<IP_address> or https://<FullyQualifiedDomainName>
Description
Select the Yes radio button to enable HTTPS remote management
(which is the default setting) and specify the IP address settings and
port number settings. Select the No radio button to disable HTTPS
remote management.
Select one of the following IP address settings:
• Everyone. Allow access from any IP address on the Internet.
• IP address range. Allow access from a range of IP addresses on
the Internet. Enter a beginning and ending IP address to define the
allowed range.
• Only this PC. Allow access from a single IP address on the
Internet. Enter a single IP address.
Port Number
Select the Yes radio button to enable Telnet remote management,
and specify the IP address settings. Select the No radio button to
disable HTTPS remote management (which is the default setting).
Select one of the following IP address settings:
• Everyone. Allow access from any IP address on the Internet.
• IP address range. Allow access from a range of IP addresses on
the Internet. Enter a beginning and ending IP address to define the
allowed range.
• Only this PC. Allow access from a single IP address on the
Internet. Enter a single IP address.
Network and System Management
254
The default HTTPS port is 443. As an option, you
can change the port number.