NETGEAR SRX5308 Reference Manual page 49

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Table 9. Add QoS screen settings for a rate control profile (continued)
Setting
Congestion Priority
Hosts
Min Bandwidth
Max Bandwidth
Diffserv QoS Remark
4. Click Apply to save your settings. The profile is added to the List of QoS Profiles table on
the QoS screen.
Description
From the drop-down list, select the priority queue that determines the allocation
of excess bandwidth and the classification level of the packets among other
priority queues on the VPN firewall:
• Default. Traffic is mapped based on the ToS field in the packet's IP header.
• High. This queue includes the following DSCP values: AF41, AF42, AF43,
AF44, and CS4.
• Medium-high. This queue includes the following DSCP values: AF31, AF32,
AF33, AF34, and CS3.
• Medium. This queue includes the following DSCP values: AF21, AF22,
AF23, AF24, and CS2.
• Low. This queue includes the following DSCP values: AF11, AF12, AF13,
AF14, CS1, 0, and all other values.
From the drop-down list, select the IP address, range of IP addresses, or group
to which the profile is applied:
• Single IP Address. The profile is applied to a single IP address. Enter the
address in the Start IP field.
• IP Address Range. The profile is applied to an IP address range. Enter the
start address of the range in the Start IP field and the end address of the
range in the End IP field.
• Group. The profile is applied to a group. Select the group from the Select
Group drop-down list, and specify how the bandwidth is allocated by making
a selection from the Bandwidth Allocation drop-down list.
Start IP The IP address for a single IP address or the start IP
address for an IP address range.
End IP The end IP address for an IP address range.
Select Group From the drop-down list, select the LAN group to which
the profile is applied. For information about LAN groups,
see
page 67.
Bandwidth Allocation From the drop-down list, specify how the bandwidth is
allocated:
• Shared. The bandwidth is shared among all members
of the group.
• Individual. The bandwidth is allocated to each
member of the group.
Enter the minimum bandwidth in Kbps that is allocated to the host. The default
value is 0 Kbps.
Enter the maximum bandwidth in Kbps that is allocated to the host. The default
value is 100 Kbps.
Enter a DSCP value in the range of 0 through 63. Packets are marked with this
value. Leave this field blank to disable packet marking.
Connecting the VPN Firewall to the Internet
49
Manage Groups and Hosts (LAN Groups) on