Call Forwarding - 3Com VCX Manual

Call Forwarding

Chapter 7 for information) or you can view and dial numbers from it
using the telephone display panel.
To use a system speed dial number:
1 Pick up the handset or press the Speaker button.
2 Press the Feature button plus 700 plus the system-wide speed dial
number for the number that you want to call. Alternatively, you can scroll
to System Speed Dials on the Display Panel, press Slct, scroll to the
number that you want to dial, and press Slct again.
If you dial a speed dial code that has no number assigned to it, the display
panel on your telephone shows the message "Empty speed dial."
In addition to using the Program menu to list system speed dial numbers,
you can view the system speed dial numbers configured on your
telephone by pressing the Middle Right Button next to the Display
Panel or by entering Feature + 464.
This section describes how to enable and use call forwarding features set
up through the Telephone User Interface (TUI). You can also configure
and enable call forwarding through the VCX User Interface. See
Call Forwarding.
You can use the TUI on your telephone to specify:
Where you want your call to be forwarded
■
The condition that results in the system forwarding a call:
■
Ring No Answer — Redirects incoming calls to another
■
destination when your telephone rings for a configured time
period (the default is 20 seconds). You can forward all unanswered
calls by enabling Call Forward Ring No Answer (feature code
466) and entering the number to which you want the calls
forwarded.
Busy Line —Redirects incoming calls to another destination when
■
your telephone is busy. If you have multiple lines, busy means that
all lines are in use. You can forward all calls that come in when
your lines are busy by enabling Call Forward Busy (feature code
467) and entering the number to which you want the calls
forwarded.
Call Forwarding 69
Enabling