3Com VCX Manual page 91

System Speed Dials — Allows you to view the system-wide speed
■
dial numbers configured on your system by your administrator. You
cannot add, modify, or delete a system speed dial number.
However, you can export the list to a Microsoft Excel spreadsheet.
You can also map a system speed dial number to a button on your
telephone (see
User Interface). See
Call Forwarding —Allows you to control how the VCX system
■
handles your calls when you do not answer a call, your extension is
busy, or your calls are forwarded to another extension. See
Enabling Call Forwarding
Selective Ringing — Enables you to configure Selective Ringing
■
for calls coming in from up to 10 telephone numbers. For each
number, you can select one of 9 tones and for each tone you can
choose to have the telephone ring once, twice, or three times.
You can silence the ringer and only allow the telephone to flash by
selecting Ringer Disabled in the Ring Tone drop down list. You can
also delay the ring of a bridged line telephone or hunt group
extension for a specified number of seconds.
If you configure a selective ring pattern for a telephone extension
of a configured bridged line or a hunt group, that extension
appears in the Hunt Group and Bridged Calls list. When an
extension appears in this list, you can then change the delay time.
Privacy — Allows you to control whether the VCX system sends
■
your Caller ID when you make a call. See
Call Restrictions — Allows you to block incoming and outgoing
■
calls that match specified patterns.
Call Coverage
■
Call Coverage — Allows you to set your default call coverage
■
point. The configured call coverage point determines the
destination of a call that is either not answered in time, or cannot
be answered because the destination is busy or unreachable
(logged out, or disconnected from the network). The default
destination for unanswered calls is voice mail. See
Call Coverage
Predefined Rule — A Predefined Rule allows you to create a rule
■
from a specified list of predefined call coverage values defined by
the Administrator.
Assigning Access Button Functions Using the VCX
Dialing System Speed Dial
for additional information.
Point.
VCX User Interface Overview
Numbers.
Controlling Caller
Configuring a
91
ID.